Friday, August 7, 2009

Zip Line Install Tips

We have decided to run a new promotion with our website (www.backyardplayplaces.com) to encourage people to ask questions and leave comments for others about their backyard playgrounds. Every month we will pick a different topic to blog about. Anyone who writes in this blog will receive a 5% off entire purchase coupon* good at www.backyardplayplaces.com. (Limit one discount per customer)

August's topic will be about zipline kits. We are in the process of installing our zip line kit and will post pictures soon. Before installing your own zip line you want to make sure that you have 2 solid ancors to attach your zip line to.

Once you determine the ancors then you want to make sure that you have a clear path and make sure that the ancors are suitable enough to allow about a 6% drop in cable. That is a 6' drop for every 100' of cable. This is a good starting point and can be adjusted later to dial in the correct speed. You will also want to take into consideration about a 2% drop in cable for sagging. Once the path is clear it is time to set up the cable. I use a chain wrapped around one anchor with a turnbuckle and at the other anchor I use just the cable. It is a good idea on the end with just the cable to use some rubber tubing to help protect your anchor.

You will want to pull the cable as tight as you can with the turnbuckle fully extended. This will give you the most amount of adjustment to pull the cable just right. Once the cable is hung and tight then it is time for a test run. After testing you want to make sure the cable is still tight and retighten turnbuckle and clamps. Make sure that there is no cable slippage. You will want to make sure riders are going to be able to stop before reaching the end of the ride. A brake block with bungee rope will help slow the riders down at the end of the ride.

A rope may be added to the pully to assist walking it back to the starting point. I would highly recommend using a harness if zipline is any distance off of the ground. Also if there is a good distance in the cable it is a good idea to add a seat so your hands and arms don't get too tired. To purchase parts and accessories for your zipline kit please don't forget to shop www.backyardplayplaces.com

Remember, installing and operating a safe zip line is your responsibility. Establishing a safe operating procedure is essential. Always consult a professional when installing a zip line. Children should always be supervised and taught how to operate the zip line safely.

Thursday, May 7, 2009

Welcome

Welcome to the Backyardplayplaces.com discussion page. This page was designed to share ideas, pictures, and ask questions about building the ultimate backyard. Feel free to ask any questions regarding backyard structures and activities. Anywhere from, what is the best ground material for play areas to designing and setting up a zip line to building a rope bridge. I have lots of experience and many ideas for backyard fun. I will answer all questions to the best of my ability, no matter how difficult. Thank you for all your comments and I look forward to helping you. Disclaimer - no information provided by Backyard Play Places shall be viewed as professional instruction or advice. All written or spoken material is opinion and does not guarantee safety. When installing backyard toys professional help should be obtained. All persons are wholly responsible for the safe selection, installation and operation of their play equipment.